ATTiny841 Breakout Board
Want to develop any circuit with ATTINY841, but can’t due to the missing PDIP package. We have designed this breakout board that converts the SOIC package to a breadboard-friendly part. To keep the parts as close to the PDIP Package, we have kept the board as simple as possible. The board does not have any onboard power supply so that the user can use their power supply.
No. of Items Per Pack: 2
$12.00
Description
ATTINY841 Breakout Board is SOIC to PDIP conversion board. The board is pre-soldered with genuine ATTIN841 MCU and designed to match the grid pattern of a breadboard of any size. The pin definitions are printed on the top of the board to help the customers identify the pins without any issues. The boards are pre-configured with the factory bootloader, and the bootloader section is unlocked. So that users can upload their custom firmware if they want.
For programming the MCU, users can use programmers of their choice. But we have mentioned the official programming method and pin supported by the manufacturer’s official programming kit.
Users can learn about the basic details of the MCU by going through the table below.
| PARAMETRICS DETAILS | |
|---|---|
| PART NAME | ATTINY841-SSU |
| PIN COUNT | 14 |
| PROGRAMMING METHOD | SPI |
| PROGRAMMING PIN | PA6 – MOSI, PA5 – MISO, PA4 – SCK, PB3 – RESET |
| FLASH/PROGRAM MEMORY SIZE | 8 KB |
| RAM | 512 BYTES |
| OPERATING VOLTAGE MIN | 1.7 V |
| OPERATING VOLTAGE MAX | 5.5 V |
| MAX CPU SPEED | 16 MHZ |
| OPERATING TEMPERATURE RANGE | -40°C TO + 85°C |
To learn more about the MCU, Users can check the board-specific datasheet by clicking the DATASHEETS button.
Users can check the board-specific code samples by clicking the CODE & SAMPLES button.
Users can check the board-specific tutorials by clicking the TUTORIALS button.
